Using Tesla One App to Find Its IP address

🔌 Connecting to Your Tesla Wall Connector Using the Tesla One App

& Getting the IP Address for Wall Monitor

This guide walks you through the updated process for connecting to your Tesla Wall Connector using the Tesla One app, and retrieving its IP address to use in the Wall Monitor app.


✅ Prerequisites

  • You have a Tesla Wall Connector installed and powered.
  • You have the Quick Start Guide or QR code that came with your Wall Connector.
  • Your phone is connected to the internet and Bluetooth is enabled.

🕰️ Using an Old Wall Connector Firmware?

If your Wall Connector is running older firmware and doesn't support the Tesla One app setup, please use our legacy guide: 👉 Legacy: Joining Wall Connector's Wi-Fi & Finding Its IP Address

This includes instructions for manually connecting to the Wall Connector’s local Wi-Fi network and finding its IP via your browser.


📲 Step 1: Download the Tesla One App

Download Tesla One from the App Store

screenshot


🔐 Step 2: Open the App & Sign In

  • Launch Tesla One.
  • Tap “External Partner”.
  • Sign in with your Tesla account credentials.

screenshot


⚙️ Step 3: Start Wall Connector Setup

  • Tap the “More” tab at the bottom of the screen.
  • Select “Tesla Device Setup”.

screenshot


📡 Step 4: Scan QR or Enter Wi-Fi Details

  • Use your phone to scan the QR code on your Wall Connector’s setup guide, or
  • Manually enter the Wi-Fi SSID and password from the guide.

screenshot

💡 If your guide is missing, see Lost your Wall Connector Password/QR code? FAQ


🔌 Step 5: Connect to Your Wall Connector

  • Follow the in-app steps to connect your phone to the Wall Connector's Wi-Fi.
  • Wait for the app to complete the pairing and setup.

screenshot


🌐 Step 6: View Wi-Fi Settings

  • Once connected, tap the “Wi-Fi” row inside the app.
  • You’ll see your current network or connect to your home Wi-Fi.
  • Tap the active Wi-Fi to view network details, including the IP address.

screenshot


🧾 Step 7: Copy the IP Address

  • Copy the IP address listed (e.g. 192.168.1.24).
  • Open the Wall Monitor app and paste this IP into the setup screen to link your Wall Connector.

screenshot


🛠️ Troubleshooting Tips

  • Can't find the Wi-Fi? Hold the Wall Connector button for 5-10 seconds to prompt Wi-Fi broadcast. Look for a network like TeslaWallConnector_XXXX.

  • App won't connect? Ensure the Wall Connector is powered and your phone is near the unit with Bluetooth and Wi-Fi enabled.

  • No IP Address Showing? Tap the Wi-Fi network again. Make sure it says Connected ✓ and try refreshing.

  • Still stuck? Try turning on Airplane Mode, then re-enable Wi-Fi only and reconnect to the Wall Connector.


🧼 Optional: Reset the Wall Connector Wi-Fi

If all else fails, power cycle the Wall Connector at the breaker or consult Tesla’s Wall Connector support page for additional help.


💾 Recommend: Backup Your Wall Connector Wi-Fi Details

Back up you Wall Connector Wi-Fi details to Wall Monitor using Wall Monitor's Password Backup feature, ensuring you never lose your password again.


✅ Final Checks Before Using Wall Monitor

Make sure your Wall Connector shows:

  • Connected to Wi-Fi ✓
  • Connected to Tesla ✓
  • Valid IP address shown

You're ready to monitor and manage your Wall Connector with the Wall Monitor app!